Installing the SIM card and the battery
• Keep all miniature SIM cards out of the reach of small children.
• The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when
handling, inserting or removing the card.
• Before installing the SIM card, always make sure that the phone is dry and switched off and only
then remove the back cover.
1. With the back of the phone facing you, open the screw by pressing it
lightly and turning it 90 degrees to the left.
©2000 Nokia Mobile Phones. All rights reserved.
Get
tin
g star
ted
28
2. Remove the water resistant back cover by lifting it up.
3. Remove the BLL-2 battery if there is one.
Note: When removing the back cover and battery, do not tamper with
the other screws or the cover seals. If you do, you may invalidate the
warranty.
4. Open the SIM card holder by pressing the middle wires from sides
lightly and by releasing the card holder from its place.
5. Insert your SIM card ensuring that the bevelled corner is on the
bottom right and the golden contact area is facing downwards.
©2000 Nokia Mobile Phones. All rights reserved.
Get
tin
g star
ted
29
Get
tin
g star
ted
6. When SIM card is inserted, close the card holder
downwards and press the wires from sides again to lock
the card holder into the slots.
7. Replace the battery.
Note: Ensure you place the battery so that the electric contacts
of the battery and the phone touch one another.
Make sure the interior of your phone and the back cover seals are
dry and clean, and free of any foreign objects. Foreign objects
may damage the seals against water.
Never detach the cover seals.
©2000 Nokia Mobile Phones. All rights reserved.
Get
tin
g star
ted
30
8. Attach the back cover and close it tightly by turning the screw 90
degrees to the right.
■